Using gpbackup and gprestore with BoostFS
A newer version of this documentation is available. Use the version menu above to view the most up-to-date release of the Greenplum 6.x documentation.
Using gpbackup and gprestore with BoostFS
You can use the Greenplum Database gpbackup and gprestore utilities with the Data Domain DD Boost File System Plug-In (BoostFS) to access a Data Domain system. BoostFS leverages DD Boost technology and helps reduce bandwidth usage, can improve backup-times, offers load-balancing and in-flight encryption, and supports the Data Domain multi-tenancy feature set.
You install the BoostFS plug-in on the Greenplum Database host systems to provide access to a Data Domain system as a standard file system mount point. With direct access to a BoostFS mount point, gpbackup and gprestore can leverage the storage and network efficiencies of the DD Boost protocol for backup and recovery.
For information about configuring BoostFS, you can download the BoostFS for Linux Configuration Guide from the Dell support site https://www.dell.com/support (requires login). After logging into the support site, you can find the guide by searching for "BoostFS for Linux Configuration Guide". You can limit your search results by choosing to list only Manuals & Documentation as resources.
To back up or restore with BoostFS, you include the option --backup-dir with the gpbackup or gprestore command to access the Data Domain system.
Download the latest BoostFS RPM from the Dell support site https://www.dell.com/support (requires login).
After logging into the support site, you can find the RPM by searching for "boostfs". You can limit your search results by choosing to list only Downloads & Drivers as resources. To list the most recent RPM near the top of your search results, sort your results by descending date.
The RPM supports both RHEL and SuSE.
These steps install BoostFS and create a mounted directory that accesses a Data Domain system.
Perform the steps on all Greenplum Database hosts. The mounted directory you create must be the same on all hosts.
- Copy the BoostFS RPM to the host and install the RPM.
After installation, the DDBoostFS package files are located under /opt/emc/boostfs.
- Set up the BoostFS lockbox with the storage unit with the boostfs
utility. Enter the Data Domain user password at the
/opt/emc/boostfs/bin/boostfs lockbox set -d <Data_Domain_IP> -s <Storage_Unit> -u <Data_Domain_User>
The <Storage_Unit> is the Data Domain storage unit ID. The <Data_Domain_User> is a Data Domain user with access to the storage unit.
- Create the directory in the location you want to mount
- Mount the Data Domain storage unit with the boostfs utility. Use
the mount option -allow-others=true to allow other
users to write to the BoostFS mounted file system.
/opt/emc/boostfs/bin/boostfs mount <path_to_mount_directory> -d $<Data_Domain_IP> -s <Storage_Unit> -o allow-others=true
- Confirm that the mount was successful by running this
mountpoint <mounted_directory>The command lists the directory as a mount point.
<mounted_directory> is a mountpoint
You can now run gpbackup and gprestore with the --backup-dir option to back up a database to <mounted_directory> on the Data Domain system and restore data from the Data Domain system.
Backing Up and Restoring with BoostFS
- --backup-dir - Specify the mounted Data Domain storage unit.
- --no-compression - Disable compression. Data compression interferes with DD Boost data de-duplication.
- --single-data-file - Create a single data file on each segment host. A single data file avoids a BoostFS stream limitation.
When you use gprestore to restore a backup from a Data Domain system with BoostFS, you must specify the mounted Data Domain storage unit with the option --backup-dir.
When you use the gpbackup option --single-data-file, you cannot specify the --jobs option to perform a parallel restore operation with gprestore.
$ gpbackup --dbname test --backup-dir /boostfs-test/ --single-data-file --no-compression
$ dropdb test $ gprestore --backup-dir /boostfs-test/ --timestamp 20171103153156 --create-db
The value 20171103153156 is the timestamp of the gpbackup backup set to restore. For information about how gpbackup uses timesamps when creating backups, see Parallel Backup with gpbackup and gprestore. For information about the -timestamp option, see gprestore.