Greenplum Database 4.3.1 Release Notes
Greenplum Database 4.3.1 Release Notes
Updated: March, 2015
Welcome to Pivotal Greenplum Database 4.3.1
Greenplum Database is a massively parallel processing (MPP) database server that supports next generation data warehousing and large-scale analytics processing. By automatically partitioning data and running parallel queries, it allows a cluster of servers to operate as a single database supercomputer performing tens or hundreds times faster than a traditional database. It supports SQL, MapReduce parallel processing, and data volumes ranging from hundreds of gigabytes, to hundreds of terabytes.
About Greenplum Database 4.3.1
Greenplum Database 4.3.1 is a maintenance release that introduces a number of significant new features, as well as performance and stability enhancements. Please refer to the following sections for more information about this release.
- Product Enhancements
- Changed and Deprecated Features
- Downloading Greenplum Database
- Supported Platforms
- Resolved Issues in Greenplum Database 4.3.1
- Known Issues in Greenplum Database 4.3.1
- Upgrading to Greenplum Database 4.3.1
- Greenplum Database Tools Compatibility
- Greenplum Database Extensions Compatibility
- Hadoop Distribution Compatibility
- Greenplum Database 4.3.1 Documentation
Greenplum Database 4.3.1 includes these enhancements:
Simplified Configuration to Access HDFS Data with gphdfs
Starting with Greenplum Database 4.3.1, installing a separate gNet package is not required to use the gphdfs protocol. The jar files for the gphdfs extensions, the libraries, and the documentation for the gphdfs extensions are bundled with Greenplum Database. The files are installed in $GPHOME/lib/hadoop. The gphdfs protocol is used with external tables to access data from Hadoop file systems.
Starting with Greenplum Database 4.3.1, to upgrade to a different version of gphdfs, you must install the version of Greenplum Database that contains the version of gphdfs that you wish to use.
For information about the gphdfs protocol, see the Greenplum Database Administrator Guide.
Enhancements for Accessing External Data with Greenplum Database
Greenplum Database 4.3.1 includes these enhancements:
- The Greenplum Database gpfdist utility has been enhanced. The
gpfdist utility is the Greenplum
Database parallel file distribution program. The utility serves data files to or
writes data files out from Greenplum Database segments.
The new gpfdist optional -w option that specifies the number of seconds that Greenplum Database delays before closing a target file such as a named pipe.
For Greenplum Database with multiple segments, there might be a delay between segments when writing data from different segments to the file. You can specify a time to wait before Greenplum Database closes the file to ensure all the data is written to the file.
- The Greenplum Database gpload utility has been enhanced. The
gpload utility runs a job that
loads data into a Greenplum Database table. You control the load job with a YAML
The INSERT, UPDATE or MERGE operation that gpload performs, including any SQL commands specified in the SQL collection of the YAML file, are performed as a single transaction. Performing the operation as a single transaction prevents inconsistent data when performing multiple, simultaneous load operations on a target table.
The new gpload option --no_auto_trans disables performing the operation as a single transaction.
For information about the gpfdist and gpload utilities, see the Greenplum Database Utility Guide.
Enhancement for Restoring Data from a Greenplum Database Backup
Greenplum Database 4.3.1 includes this enhancement:
- The new option --noanalyze for the Greenplum Database
gpdbrestore utility disables
ANALYZE of tables during
The default action is to run the ANALYZE command after a restore. This option is useful if running ANALYZE on tables in your database requires a significant amount of time. If you specify this option, you should run ANALYZE manually on restored tables. Failure to run ANALYZE following a restore might result in poor database performance.
For information about the gpdbrestore, gpfdist and gpload utilities, see the Greenplum Database Utility Guide.
Query Memory Accounting Framework
When an out of memory event occurs, the Greenplum Database memory accounting framework reports detailed memory consumption of every query running at the time of the event. The information is written to the Greenplum Database segment logs.
Organization of Greenplum Database Administration Documentation
To make managing Greenplum Database easier, the information to manage and use Greenplum Database systems and database instances have been consolidated into a single book for Greenplum Database 4.3.1 and has been reorganized into five sections.
The information in the Greenplum Database System Administrator Guide and the Greenplum Database Database Administrator Guide has been combined into the Greenplum Database Administrator Guide.
See the Preface for a description of the guide sections.
.For a list of Greenplum Database documents, see Greenplum Database 4.3.1 Documentation. For a description of the documentation, go to the Pivotal documentation web About the Pivotal Greenplum Database Documentation Set page .
Changed and Deprecated Features
The following are Greenplum Database 4.3.1 changed and deprecated features.
These are the updates to the Greenplum Database supported platforms:
- Greenplum Database 4.3.1 supports RHEL 6.5 and SUSE Linux Enterprise Server 64-bit 11 SP2.
- Greenplum Database 4.3.1 supports DDBoost SDK 22.214.171.124.
See “Supported Platforms” for information about platform and SDK support.
Pivotal plans to deprecate the following item:
- In Greenplum Database 4.3.1, Pivotal is
deprecating support for the TCP and
UDP interconnect types or
inter-process communication between Greenplum Database segments. The UDPIFC interconnect type will be the only
supported interconnect type in a future release of Greenplum Database. The UDPIFC interconnect type provides better
performance and stability.
The interconnect is the networking layer of Greenplum Database. The interconnect refers to the inter-process communication between segments and the network infrastructure on which this communication relies. The Greenplum Database interconnect type is controlled by the Greenplum Database server configuration parameter gp_interconnect_type.
For information about the Greenplum Database interconnect, see the Greenplum Database Administrator Guide. For information about the server configuration parameter gp_interconnect_type, see the Greenplum Database Reference Guide.
Please send any questions or comments about the deprecated items to https://support.pivotal.io.
Downloading Greenplum Database
Greenplum Database 4.3.1 runs on the following platforms:
- Red Hat Enterprise Linux 64-bit 5.5, 5.6, 5.7, 6.1, 6.2, 6.4, and 6.5
- SuSE Linux Enterprise Server 64-bit 10 SP4, 11 SP1, 11 SP2
- Solaris x86 64-bit v10 U7, U8, U9, U10
Pivotal plans to deprecate the Solaris operating system. See Deprecated Features.
- Oracle Unbreakable Linux 64-bit 5.5
- CentOS 64-bit 5.5, 5.6, 5.7, 6.1, and 6.2
Greenplum Database 4.3.1 supports Data Domain Boost on Red Hat Enterprise Linux.
This table lists the versions of Data Domain Boost SDK and DDOS supported by Greenplum Database 4.3.x.
|Greenplum Database||Data Domain Boost||DDOS|
|126.96.36.199||188.8.131.52||5.2, 5.3, and 5.4|
|184.108.40.206||220.127.116.11||18.104.22.168, 5.1, and 5.2|
- Greenplum Database 4.3.x, all versions, is supported on DCA V2, and requires DCA software version 22.214.171.124 or greater due to known DCA software issues in older DCA software versions.
- Greenplum Database 4.3.x, all versions, is supported on DCA V1, and requires DCA software version 126.96.36.199 or greater due to known DCA software issues in older DCA software versions.
Resolved Issues in Greenplum Database 4.3.1
The table below lists issues that are now resolved in Greenplum Database 4.3.1.
For issues resolved in prior releases, refer to the corresponding release notes available from Dell EMC Support Zone.
|Issue Number||Category||Resolved In||Description|
|23757||Security||4.3.1||Greenplum Database software has been updated to use OpenSSL 0.9.8za in response to the OpenSSL Security Advisory [05 Jun 2014]. For information about the advisory, see https://www.openssl.org/news/secadv_20140605.txt.|
|22301||Replication: Master Mirroring||4.3.1||DCA customers who wished to use Greenplum Database 4.3 could not use the utility dca_setup. This issue has been resolved in Greenplum Database 4.3.1.|
|22281||Backup and Restore||4.3.1||For partitioned append-optimized tables, a partition was backed up even though it was not modified.|
|21591||Management Scripts Suite||4.3.1||The Greenplum Database utilities gpstart and gprecoverseg hung when checking the process ID in the postmaster.pid file and the ID matched a non-postgres running process.|
|23421||Locking, Signals, Processes||4.3.1||In some cases, concurrent CREATE TABLE and DROP TABLE operations caused Greenplum Database to hang due to incorrect lock handling.|
|13825||Functions and Languages, Transaction Management||4.3.1||In PL/PGSQL functions, exception blocks
were not handled properly. Depending on where the exception is encountered during
function execution, the improper block handling resulted in either the creation of
catalog inconsistency between master and segment, or Greenplum Database issuing
the following message:
The distributed transaction 'Prepare' broadcast failed to one or more segments.
|22655||Locking, Signals, Processes||4.3.1||Greenplum Database hung due to incorrect lock handling that caused a race condition. The lock handling issue was caused by a compiler optimization.|
|20924||Dispatch||4.3.1||For some queries that contained a window function and that executed on both the master and segments, the query would hang when executed from an ODBC/JDBC client.|
|21899||Backup and Restore||4.3.1||When performing an incremental backup, the gpcrondump utility backed up temporary tables that existed during the time of the backup. This caused a failure when performing a restore with the gpdbrestore utility that used the incremental backup.|
|22293||Backup and Restore||4.3.1||Greenplum Database supports Data Domain DDOS 5.4. See Supported Platforms for information about supported versions of Data Domain Boost.|
|22442||Loaders: gpfdist||4.3.1||The Greenplum Database Load Tools for Windows installation did not include the gssapi and auth libraries. This issue has been resolved.|
|19476||Client Access Methods and Tools||4.3.1||Running multiple gpload sessions simultaneously that loaded data into the same table resulted in inconsistent data in the table. See the gpload information in Product Enhancements.|
|22863||DDL and Utility Statements||4.3.1||When > (greater than) was used in
the CREATE OPERATOR CLASS command as an operator name, this error
operator > is not a valid ordering operator when using operator classes
|22219||Query Planner||4.3.1||In certain queries that contain the median function and a GROUP BY clause, the query planner produced an incorrect plan in which some necessary columns were not projected in the operator nodes. This caused an error when trying to look up the missing columns.|
|22084||OS Abstraction||4.3.1||Improved handing of situations where Greenplum Database encounters segment violation errors.|
|17995||DDL and Utility Statements||4.3.1||In some cases, the functions pg_cancel_backend() and pg_terminate_backend() did not terminate sessions.|
|17773||DDL and Utility Statements||4.3.1||Greenplum Database did not properly check privileges during certain RESET ALL operations.|
|17481||Catalog and Metadata, DDL and Utility Statements||4.3.1||Queries on the system view pg_partitions could fail to return when DDL statements on partitioned tables were running concurrently.|
|15834||Loaders: Copy/ExternalTabs||4.3.1||A COPY command cancel request (Ctrl+c) followed by another COPY command and a cancel request caused the Greenplum Database session to hang. When cancel request was attempted again, a SIGSEGV error occured.|
|14367||DDL and Utility Statements||4.3.1||ALTER TABLE ADD COLUMN with default NULL was not supported for append-optimized tables. This syntax is now supported.|
|21522||Backup and Restore||4.3||The Greenplum Database utility pg_dump printed information-level messages (messages with the label [INFO]) to stderr that were not printed in previous releases. These messages were printed even when pg_dump completes without errors.|
Known Issues in Greenplum Database 4.3.1
This section lists the known issues in Greenplum Database 4.3.1. A workaround is provided where applicable.
For known issues discovered in previous releases, including patch releases to Greenplum Database 4.2.x, 4.1 or 4.0.x, see the corresponding release notes, available from EMC Dell EMC Support Zone:
|19660||Authentication||An issue in Greenplum Database prevents LDAPS (LDAP over SSL) from functioning on the standard secure port 636.|
|23824||Authentication||In some cases, LDAP client utility
tools cannot be used after running the source command
because the LDAP libraries included with Greenplum Database are not compatible with the LDAP client utility tools that are installed with operating system.
Workaround: The LDAP tools can be used without running the source command in the environment.
|22328||Management Scripts||The process of updating a Greenplum
Database package includes removing all previous versions of the system objects
related to the package. For example, previous versions of shared libraries are
After the update process, a database function will fail when it is called if the function references a package file that has been removed.
|23227||Client Access Methods and Tools||When using Kerberos and the GSSAPI authentication method, the Greenplum Database role property Valid Until is ignored. This property is used to control access to a Greenplum database.|
|23568||Backup and Restore||When backing up a Greenplum database with the Greenplum Database gpcrondump utility and specifying an NFS directory with the -u option, the gpcrondump utility creates an empty db_dumps directory in the master and segment data directories.|
|23637||Backup and Restore||When restoring a Greenplum database
with the Greenplum Database gpcrondump utility, the utility performs an
ANALYZE operation on the entire database.
Workaround: When restoring Greenplum database with the Greenplum Database gpcrondump utility, specify the --noanalyze option, and then run the ANALYZE command on the tables that require updated statistics.
|23485||Transaction Management||When a single session to Greenplum Database runs transactions, temporary files were not removed after the transaction completed. If a the session ran a large number of transactions, the temporary files required a large amount of disk space.|
|23417||Transaction Management||Some SQL queries against an append-optimized table that has compression enabled and that contains a column with an unknown data type cause a Greenplum Database SIGSEGV error.|
|22205||Replication: Segment Mirroring||In some cases, running the Greenplum Database command gprecoverseg -r to rebalance segment instances fails and causes database catalog corruption.|
|23525||Query Planner||Some SQL queries that contain
sub-selects fail with this error.
ERROR: Failed to locate datatype for paramid 0
|22792||Build||Greenplum Database is not certified on Red Hat Enterprise Linux 5.10.|
|22215||Build||Greenplum Database is not certified
with these connectivity drivers:
Data Direct v 7.022; PowerExchange for Greenplum 9.5.1
32-bit Microstrategy ODBC for Greenplum Wire Protocol 6.10.01.80
Open source ODBC 9.01.0100 and JDBC 9.1.902 Type 4
SAS/ACCESS 9.3 driver provided with SAS software2
|23366||Resource Management||In Greenplum Database 188.8.131.52 and later, the priority of some running queries, cannot be dynamically adjusted with the gp_adjust_priority() function. The attempt to execute this request might silently fail. The return value of the gp_adjust_priority() call indicates success or failure. If 1 is returned, the request was not successfully executed. If a number greater than 1 is returned, the request was successful. If the request fails, the priority of all running queries are unchanged, they remain as they were before the gp_adjust_priority() call.|
|23492||Backup and Restore,||A backup from a Greenplum Database 4.3.x system that is created with a Greenplum Database back up utility, for example gpcrondump, cannot be restored to a Greenplum Database 4.2.x system with the psql utility or the corresponding restore utility, for example gpdbrestore.|
|23521||Client Access Methods and Tools||Hadoop YARN based on Hadoop 2.2 or
later does not work with Greenplum Database.
Workaround: For Hadoop distributions based on Hadoop 2.2 or later that are supported by Greenplum Database, the classpath environment variable and other directory paths defined in $GPHOME/lib/hadoop/hadoop_env.sh must be to be modified so that the paths point to the appropriate JAR files.
|21917||Replication: Segment Mirroring||In some rare cases after the Greenplum Database utility gprecoverseg was run, some append-optimized tables and a persistent table were detected having less data on a mirror segment corresponding to a primary segment.|
|20453||Query Planner||For SQL queries of either of the
SELECT columns FROM table WHERE table.column NOT IN subquery; SELECT columns FROM table WHERE table.column = ALL subquery;
tuples that satisfy both of the following conditions are not included in the result set:
|21724||Query Planner||Greenplum Database executes an SQL query in two stages if a scalar subquery is involved. The output of the first stage plan is fed into the second stage plan as a external parameter. If the first stage plan generates zero tuples and directly contributes to the output of the second stage plan, incorrect results might be returned.|
|21838||Backup and Restore||When restoring sets of tables with the
Greenplum Database utility gpdbrestore, the table schemas must be defined in the
database. If a table’s schema is not defined in the database, the table is not
restored. When performing a full restore, the database schemas are created when
the tables are restored.
Workaround: Before restoring a set of tables, create the schemas for the tables in the database.
|21129||DDL and Utility Statements||SSL is only supported on the master host. It is not supported on segment hosts.|
|20822||Backup and Restore||Special characters such as !, $, #, and @ cannot be used in the password for the Data Domain Boost user when specifying the Data Domain Boost credentials with the gpcrondump options --ddboost-host and --ddboost-user.|
|18247||DDL and Utility Statements||
TRUNCATE command does
not remove rows from a sub-table of a partitioned table. If you specify a
sub-table of a partitioned table with the TRUNCATE command, the
command does not remove rows from the sub-table and its child
Workaround: Use the ALTER TABLE command with the TRUNCATE PARTITIONclause to remove rows from the sub-table and its child tables.
|19788||Replication: Resync, Transaction Management||In some rare circumstances, performing
a full recovery with gprecoverseg fails due to inconsistent LSN.
Workaround: Stop and restart the database. Then perform a full recovery with gprecoverseg.
gpload fails on
Windows XP with Python 2.6.
Workaround: Install Python 2.5 on the system where gpload is installed.
|19493 19464 19426||Backup and Restore||The gpcrondump and
gpdbrestore utilities do not handle errors returned by DD Boost
or Data Domain correctly.
These are two examples:
Workaround: The errors are logged in the master and segment server backup or restore status and report files. Scan the status and report files to check for error messages.
|19278||Backup and Restore||When performing a selective restore of
a partitioned table from a full backup with gpdbrestore, the data
from leaf partitions are not restored.
Workaround: When doing a selective restore from a full backup, specify the individual leaf partitions of the partitioned tables that are being restored. Alternatively, perform a full backup, not a selective backup.
|Backup and Restore||Greenplum Database’s implementation of
RSA lock box for Data Domain Boost changes backup and restore requirements for
customers running SUSE.
The current implementation of the RSA lock box for Data Domain Boost login credential encryption only supports customers running on Red Hat Enterprise Linux.
Workaround: If you run Greenplum Database on SUSE, use NFS as your backup solution. See the Greenplum Database Administrator Guide for information on setting up a NFS backup.
|18850||Backup and Restore||Data Domain Boost credentials cannot be
set up in some environments due to the absence of certain libraries (for example,
libstdc++) expected to reside
on the platform.
Workaround: Install the missing libraries manually on the system.
|18851||Backup and Restore||When performing a data-only restore of a particular table, it is possible to introduce data into Greenplum Database that contradicts the distribution policy of that table. In such cases, subsequent queries may return unexpected and incorrect results. To avoid this scenario, we suggest you carefully consider the table schema when performing a restore.|
|18774||Loaders||External web tables that use IPv6 addresses must include a port number.|
|18713||Catalog and Metadata||Drop language plpgsql cascade results
in a loss of gp_toolkit
Workaround: Reinstall gp_toolkit.
|18710||Management Scripts Suite||Greenplum Management utilities cannot
parse IPv6 IP addresses.
Workaround: Always specify IPv6 hostnames rather than IP addresses
|18703||Loaders||The bytenum field (byte offset in the load file where the error occurred) in the error log when using gpfdist with data in text format errors is not populated, making it difficult to find the location of an error in the source file.|
|12468||Management Scripts Suite||
gpexpand --rollback fails if an error occurs during expansion such
that it leaves the database down
gpstart also fails as it detects that expansion is in progress and suggests to run gpexpand --rollback which will not work because the database is down.
Workaround: Run gpstart -m to start the master and then run rollback,
|18785||Loaders||Running gpload with the --ssl option and the relative path of
the source file results in an error that states the source file is
Workaround: Provide the full path in the yaml file or add the loaded data file to the certificate folder.
|18414||Loaders||Unable to define external tables with fixed width format and empty line delimiter when file size is larger than gpfdist chunk (by default, 32K).|
|14640||Backup and Restore||
gpdbrestore outputting incorrect non-zero error message.
When performing single table restore, gpdbrestore gives warning messages about non-zero tables however prints out zero rows.
|17285||Backup and Restore||NFS backup with gpcrondump -c can fail.
In circumstances where you haven't backed up to a local disk before, backups to NFS using gpcrondump with the -c option can fail. On fresh systems where a backup has not been previously invoked there are no dump files to cleanup and the -c flag will have no effect.
Workaround: Do not run gpcrondump with the -c option the first time a backup is invoked from a system.
|17837||Upgrade/ Downgrade||Major version upgrades internally
depend on the gp_toolkit system
schema. The alteration or absence of this schema may cause upgrades to error out
during preliminary checks.
Workaround: To enable the upgrade process to proceed, you need to reinstall the gp_toolkit schema in all affected databases by applying the SQL file found here: $GPHOME/share/postgresql/gp_toolkit.sql.
|17513||Management Scripts Suite||Running more than one gpfilespace command concurrently with
itself to move either temporary files (--movetempfilespace) or transaction files (--movetransfilespace) to a new
filespace can in some circumstances cause OID
Workaround: Do not run more than one gpfilespace command concurrently with itself. If an OID inconsistency is introduced gpfilespace --movetempfilespace or gpfilespace --movetransfilespace can be used to revert to the default filespace.
ALTER TABLE ADD PARTITION inheritance issue
When performing an ALTER TABLE ADD PARTITION operation, the resulting parts may not correctly inherit the storage properties of the parent table in cases such as adding a default partition or more complex subpartitioning. This issue can be avoided by explicitly dictating the storage properties during the ADD PARTITION invocation. For leaf partitions that are already afflicted, the issue can be rectified through use of EXCHANGE PARTITION.
|17795||Management Scripts Suite||Under some circumstances, gppkg on SUSE is unable to correctly
interpret error messages returned by rpm.
On SUSE, gppkg is unable to operate correctly under circumstances that require a non-trivial interpretation of underlying rpm commands. This includes scenarios that result from overlapping packages, partial installs, and partial uninstalls.
|17604||Security||A Red Hat Enterprise Linux (RHEL) 6.x
security configuration file limits the number of processes that can run on
RHEL 6.x contains a security file (/etc/security/limits.d/90-nproc.conf) that limits available processes running on gpadmin to 1064.
Workaround: Remove this file or increase the processes to 131072.
|17415||Installer||When you run gppkg -q -info<some gppkg>, the system shows the GPDB version as main build dev.|
|17334||Management Scripts Suite||You may see warning messages that
interfere with the operation of management scripts when logging in.
Greenplum recommends that you edit the /etc/motd file and add the warning message to it. This will send the messages to are redirected to stdout and not stderr. You must encode these warning messages in UTF-8 format.
|17221||Resource Management||Resource queue deadlocks may be encountered if a cursor is associated with a query invoking a function within another function.|
|17113||Management Scripts Suite||Filespaces are inconsistent when the
Greenplum database is down.
Filespaces become inconsistent in case of a network failure. Greenplum recommends that processes such as moving a filespace be done in an environment with an uninterrupted power supply.
gpfdistshows the error “Address already in use” after successfully
binding to socket IPv6.
Greenplum supports IPv4 and IPv6. However, gpfdist fails to bind to socket IPv4, and shows the message “Address already in use”, but binds successfully to socket IPv6.
|16519||Backup and Restore||Limited data restore functionality
and/or restore performance issues can occur when restoring tables from a full
database backup where the default backup directory was not used.
In order to restore from backup files not located in the default directory you can use the -R to point to another host and directory. This is not possible however, if you want to point to a different directory on the same host (NFS for example).
Workaround: Define a symbolic link from the default dump directory to the directory used for backup, as shown in the following example:
|16064||Backup and Restore||Restoring a compressed dump with the
--ddboost option displays incorrect dump parameter
When using gpdbrestore --ddboost to restore a compressed dump, the restore parameters incorrectly show “Restore compressed dump = Off”. This error occurs even if gpdbrestore passes the --gp-c option to use gunzip for in-line de-compression.
|15899||Backup and Restore||When running gpdbrestore with the list (-L) option, external tables do not appear; this has no functional impact on the restore job.|
Upgrading to Greenplum Database 4.3.1
The upgrade path supported for this release is Greenplum Database 4.2.x.x to Greenplum Database 4.3.1. The minimum recommended upgrade path for this release is from Greenplum Database version 4.2.x.x. If you have an earlier major version of the database, you must first upgrade to version 4.2.x.x.
For detailed upgrade procedures and information, see the following sections:
- Upgrading from 4.3 to 4.3.1
- Upgrading from 4.2.x.x to 4.3.1
- For Users Running Greenplum Database 4.1.x.x
- For Users Running Greenplum Database 4.0.x.x
- For Users Running Greenplum Database 3.3.x.x
- Troubleshooting a Failed Upgrade
If you are utilizing Data Domain Boost, you have to re-enter your DD Boost credentials after upgrading from Greenplum Database 4.2.x.x to 4.3 as follows:
gpcrondump --ddboost-host ddboost_hostname --ddboost-user ddboost_user
Upgrading from 4.3 to 4.3.1
An upgrade from 4.3 to 4.3.1 involves stopping Greenplum Database, updating the Greenplum Database software binaries, and restarting Greenplum Database.
- Log in to your Greenplum Database master host as
the Greenplum administrative user:
$ su - gpadmin
- Perform a smart shutdown of your current Greenplum
Database 4.3 system (there can be no active connections to the
- Run the installer for 4.3.1 on the Greenplum
Database master host. When prompted, choose an installation location in the same base
directory as your current installation. For
- Edit the environment of the Greenplum Database
superuser (gpadmin) and make sure you are sourcing the greenplum_path.sh file for the new
installation. For example change the following line in .bashrc or your chosen profile
Or if you are sourcing a symbolic link (/usr/local/greenplum-db) in your profile files, update the link to point to the newly installed version. For example:
$ rm /usr/local/greenplum-db $ ln -s /usr/local/greenplum-db-184.108.40.206 /usr/local/greenplum-db
- Source the environment file you just edited. For
$ source ~/.bashrc
- Run the gpseginstall utility to install the 4.3.1 binaries on all the segment
hosts specified in the hostfile. For
$ gpseginstall -f hostfile
- After all segment hosts have been upgraded, you
can log in as the gpadmin user and restart your Greenplum Database
$ su - gpadmin $ gpstart
- If you are utilizing Data Domain Boost, you have
to re-enter your DD Boost credentials after upgrading from Greenplum Database 4.3 to
gpcrondump --ddboost-host ddboost_hostname --ddboost-user ddboost_user
Upgrading from 4.2.x.x to 4.3.1
This section describes how you can upgrade from Greenplum Database 4.2.x.x or later to Greenplum Database 4.3.1 For users running versions prior to 4.2.x.x of Greenplum Database, see the following:
Planning Your Upgrade
Before you begin your upgrade, make sure the master and all segments (data directories and filespace) have at least 2GB of free space.
Prior to upgrading your database, Pivotal recommends that you run a pre-upgrade check to verify your database is healthy.
You can perform a pre-upgrade check by executing the gpmigrator (_mirror) utility with the --check-only option.
source $new_gphome/greenplum_path.sh; gpmigrator_mirror --check-only $old_gphome $new_gphome
Performing a pre-upgrade check of your database with the gpmigrator (_mirror) utility should done during a database maintenance period. When the utility checks the database catalog, users cannot access the database.
Migrating a Greenplum Database That Contains AO Tables
The migration process updates AO tables that are in a Greenplum Database to UAO tables. For a database that contains a large number of AO tables, the conversion to UAO tables might take a considerable amount of time.
This section divides the upgrade into the following phases: pre-upgrade preparation, software installation, upgrade execution, and post-upgrade tasks.
We have also provided you with an Upgrade Checklist that summarizes this procedure.
Pre-Upgrade Preparation (on your 4.2.x system)
Perform these steps on your current 4.2.x Greenplum Database system. This procedure is performed from your Greenplum master host and should be executed by the Greenplum superuser (gpadmin).
- Log in to the Greenplum Database master as the
$ su - gpadmin
Vacuum all databases prior to upgrade. For
$ vacuumdb database_name
Clean out old server log files from your master and segment data directories. For
example, to remove log files from 2011 from your segment
$ gpssh -f seg_host_file -e 'rm /gpdata/*/gp*/pg_log/gpdb-2011-*.csv'Note: Running Vacuum and cleaning out old logs files is not required, but it will reduce the size of Greenplum Database files to be backed up and migrated.
- Run gpstate to check for failed
- If you have failed segments, you must recover
them using gprecoverseg before you can
$ gprecoversegNote: It might be necessary to restart the database if the preferred role does not match the current role; for example, if a primary segment is acting as a mirror segment or a mirror segment is acting as a primary segment.
- Copy or preserve any additional folders or files (such as backup folders) that you have added in the Greenplum data directories or $GPHOME directory. Only files or folders strictly related to Greenplum Database operations are preserved by the migration utility.
Install the Greenplum Database 4.3 Software Binaries
- Download or copy the installer file to the Greenplum Database master host.
- Unzip the installer file. For
# unzip greenplum-db-220.127.116.11-PLATFORM.zip
- Launch the installer using bash. For
# /bin/bash greenplum-db-18.104.22.168-PLATFORM.bin
- The installer will prompt you to accept the Greenplum Database license agreement. Type yes to accept the license agreement.
- The installer will prompt you to provide an installation path. Press ENTER to accept the default install path (for example: /usr/local/greenplum-db-22.214.171.124), or enter an absolute path to an install location. You must have write permissions to the location you specify.
- The installer installs the Greenplum Database software and creates a greenplum-db symbolic link one directory level above your version-specific Greenplum installation directory. The symbolic link is used to facilitate patch maintenance and upgrades between versions. The installed location is referred to as $GPHOME.
- Source the path file from your new 4.3.1
$ source /usr/local/greenplum-db-126.96.36.199/greenplum_path.sh
- Run the gpseginstall utility to install the
4.3.1 binaries on all the segment hosts specified in the
$ gpseginstall -f hostfile
During upgrade, all client connections to the master will be locked out. Inform all database users of the upgrade and lockout time frame. From this point onward, users should not be allowed on the system until the upgrade is complete.
- Source the path file from your old 4.2.x.x
$ source /usr/local/greenplum-db-188.8.131.52/greenplum_path.sh
- (optional but strongly recommended) Back up all databases in your Greenplum Database system using gpcrondump (or zfs snapshots on Solaris systems). See the Greenplum Database Administrator Guide for more information on how to do backups using gpcrondump. Make sure to secure your backup files in a location outside of your Greenplum data directories.
- If your system has a standby master host
configured, remove the standby master from your system configuration. For
$ gpinitstandby -r
- Perform a clean shutdown of your current
Greenplum Database 4.2.x.x system. For
- Source the path file from your new 184.108.40.206
$ source /usr/home/greenplum-db-220.127.116.11/greenplum_path.sh
- Update the Greenplum Database environment so
it is referencing your new 4.3.1 installation.
- For example, update the greenplum-db symbolic link on the
master and standby master to point to the new 4.3.1 installation directory.
For example (as
# rm -rf /usr/local/greenplum-db # ln -s /usr/local/greenplum-db-18.104.22.168 /usr/local/greenplum-db # chown -R gpadmin /usr/local/greenplum-db
- Using gpssh, also update
the greenplum-db symbolic
link on all of your segment hosts. For example (as
# gpssh -f segment_hosts_file => rm -rf /usr/local/greenplum-db => ln -s /usr/local/greenplum-db-22.214.171.124 /usr/local/greenplum-db => chown -R gpadmin /usr/local/greenplum-db => exit
- For example, update the greenplum-db symbolic link on the master and standby master to point to the new 4.3.1 installation directory. For example (as root):
- (optional but
recommended) Prior to running the migration, perform a pre-upgrade check to
verify that your database is healthy by executing the 4.3.1 version of the gpmigrator utility with the --check-only option. For example:
# gpmigrator_mirror --check-only /usr/local/greenplum-db-126.96.36.199 /usr/local/greenplum-db-4.3.1
- As gpadmin, run the 4.3.1 version of the migration utility specifying
your old and new GPHOME
locations. If your system has mirrors, use gpmigrator_mirror. If your system does not have mirrors, use gpmigrator. For example on a system
$ su - gpadmin $ gpmigrator_mirror /usr/local/greenplum-db-188.8.131.52 /usr/local/greenplum-db-184.108.40.206Note: If the migration does not complete successfully, contact Customer Support (see Troubleshooting a Failed Upgrade).
- The migration can take a while to complete.
After the migration utility has completed successfully, the Greenplum Database
4.3.1 system will be running and accepting connections. Note: After the migration utility has completed, the resynchronization of the mirror segments with the primary segments continues. Even though the system is running, the mirrors are not active until the resynchronization is complete.
Post-Upgrade (on your 4.3.1 system)
- If your system had a standby master host
configured, reinitialize your standby master using gpinitstandby:
$ gpinitstandby -s standby_hostname
- If your system uses external tables with gpfdist, stop all gpfdist processes on your ETL servers and reinstall gpfdist using the compatible Greenplum Database 4.3.1 Load Tools package. Application Packages are available at Pivotal Network.
- Rebuild any custom modules against your 4.3.1 installation (for example, any shared library files for user-defined functions in $GPHOME/lib).
- Use the Greenplum Databasegppkg utility to install Greenplum Database extensions. If you were previously using any Greenplum Database extensions such as pgcrypto, PL/R, PL/Java, PL/Perl, and PostGIS, download the corresponding packages from Pivotal Network, and install using this utility. See the Greenplum Database Utility Guide 4.3 for usage details.
- If you want to utilize the Greenplum Command
Center management tool, install the latest Command Center Console and update your
environment variable to point to the latest Command Center binaries (source the
gpperfmon_path.sh file from
your new installation).Note: The Greenplum Command Center management tool replaces Greenplum Performance Monitor.
Command Center Console packages are available from Pivotal Network.
- Inform all database users of the completed upgrade. Tell users to update their environment to source the Greenplum Database 4.3.1 installation (if necessary).
This checklist provides a quick overview of all the steps required for an upgrade from 4.2.x.x to 4.3.1. Detailed upgrade instructions are provided in the Upgrade Procedure section.
Pre-Upgrade Preparation (on your current system)
* 4.2.x.x system is up and available
|Log in to your master host as the gpadmin user (your Greenplum superuser).|
|(Optional) Run VACUUM on all databases,|
|(Optional) Remove old server log files from pg_log in your master and segment data directories.|
|Check for and recover any failed segments (gpstate, gprecoverseg).|
|Copy or preserve any additional folders or files (such as backup folders).|
|Install the Greenplum Database 4.3 binaries on all Greenplum hosts.|
|Inform all database users of the upgrade and lockout time frame.|
|* The system will be locked down to all user activity during the upgrade process|
|Backup your current databases.|
|Remove the standby master (gpinitstandby -r).|
|Do a clean shutdown of your current system (gpstop).|
|Update your environment to source the new Greenplum Database 4.3.1 installation.|
|Run the upgrade utility (gpmigrator_mirror if you have mirrors, gpmigrator if you do not).|
|After the upgrade process finishes successfully, your 4.3.1 system will be up and running.|
|Post-Upgrade (on your 4.3 system)|
|* The 4.2.x.x system is up|
|Reinitialize your standby master host (gpinitstandby).|
|Upgrade gpfdist on all of your ETL hosts.|
|Rebuild any custom modules against your 4.3.1 installation.|
|Download and install any Greenplum Database extensions.|
|(Optional) Install the latest Command Center Console and update your environment to point to the latest Command Center binaries.|
|Inform all database users of the completed upgrade.|
For Users Running Greenplum Database 4.1.x.x
Users on a release prior to 4.1.x.x cannot upgrade directly to 4.3.1.
For Users Running Greenplum Database 4.0.x.x
Users on a release prior to 4.1.x.x cannot upgrade directly to 4.3.1.
- Upgrade from your current release to 4.1.x.x (follow the upgrade instructions in the latest Greenplum Database 4.1.x.x release notes available on Dell EMC Support Zone).
- Upgrade from the current release to 4.2.x.x (follow the upgrade instructions in the latest Greenplum Database 4.2.x.x release notes available at Pivotal Documentation).
- Follow the upgrade instructions in these release notes for Upgrading from 4.2.x.x to 4.3.1.
For Users Running Greenplum Database 3.3.x.x
Users on a release prior to 4.0.x.x cannot upgrade directly to 4.3.1.
- Upgrade from your current release to the latest 4.0.x.x release (follow the upgrade instructions in the latest Greenplum Database 4.0.x.x release notes available on Dell EMC Support Zone).
- Upgrade the 4.0.x.x release to the latest 4.1.x.x release (follow the upgrade instructions in the latest Greenplum Database 4.1.x.x release notes available on Dell EMC Support Zone).
- Upgrade from the 4.1.1 release to the latest 4.2.x.x release (follow the upgrade instructions in the latest Greenplum Database 4.2.x.x release notes available at Pivotal Documentation).
- Follow the upgrade instructions in these release notes for Upgrading from 4.2.x.x to 4.3.1.
Troubleshooting a Failed Upgrade
If you experience issues during the migration process and have active entitlements for Greenplum Database that were purchased through Pivotal, contact Pivotal Support. Information for contacting Pivotal Support is at https://support.pivotal.io.
Be prepared to provide the following information:
- A completed Upgrade Procedure.
- Log output from gpmigrator and gpcheckcat (located in ~/gpAdminLogs)
Greenplum Database Tools Compatibility
Greenplum releases a number of client tool packages on various platforms that can be used to connect to Greenplum Database and the Greenplum Command Center management tool. The following table describes the compatibility of these packages with this Greenplum Database release.
Tool packages are available from Pivotal Network.
|Client Package||Description of Contents||Client Version||Server Versions|
|Greenplum Clients||Greenplum Database Command-Line
Greenplum MapReduce (gpmapreduce)
Note: gpmapreduce is not available on Windows.
|Greenplum Connectivity||Standard PostgreSQL Database Drivers
PostgreSQL Client C API (libpq)
|Greenplum Loaders||Greenplum Database Parallel Data Loading Tools (gpfdist, gpload)||4.3||4.3|
|Greenplum Command Center||Greenplum Database management tool.||220.127.116.11||4.3|
The Greenplum Database Client Tools, Load Tools, and Connectivity Tools are supported on the following platforms:
- AIX 5.3L (32-bit)
- AIX 5.3L and AIX 6.1 (64-bit)
- Apple OSX on Intel processors (32-bit)
- HP-UX 11i v3 (B.11.31) Intel Itanium (Client and Load Tools only)
- Red Hat Enterprise Linux i386 (RHEL 5)
- Red Hat Enterprise Linux x86_64 (RHEL 4)
- Red Hat Enterprise Linux x86_64 (RHEL 5 and RHEL 6)
- SUSE Linux Enterprise Server x86_64 (SLES 10 and SLES 11)
- Solaris 10 SPARC32
- Solaris 10 SPARC64
- Solaris 10 i386
- Solaris 10 x86_64
- Solaris 9 SPARC32
- Windows 7 (32-bit and 64-bit)
- Windows Server 2003 R2 (32-bit and 64-bit)
- Windows Server 2008 R2 (64-bit)
- Windows XP (32-bit and 64-bit)
GPText enables processing mass quantities of raw text data (such as social media feeds or e-mail databases) into mission-critical information that guides business and project decisions. GPText joins the Greenplum Database massively parallel-processing database server with Apache Solr enterprise search.
GPText requires Greenplum Database. See the GPText release notes for the required version of Greenplum Database.
Greenplum Database Extensions Compatibility
Greenplum Database delivers an agile, extensible platform for in-database analytics, leveraging the system’s massively parallel architecture. Greenplum Database enables turn-key in-database analytics with Greenplum extensions.
You can download Greenplum extensions packages from Pivotal Network and install them using the Greenplum Packager Manager (gppkg). See the Greenplum Database Utility Guide for details.
Note that Greenplum Package Manager installation files for extension packages may release outside of standard Database release cycles. Therefore, for the latest install and configuration information regarding any supported database package/extension, go to the Support site and download Primus Article 288189 from our knowledge base (Requires a valid login to the EMC Support site).
The following table provides information about the compatibility of the Greenplum Database Extensions and their components with this Greenplum Database release.
|Greenplum Database Extension||Extension Components|
|PostGIS 2.0 for Greenplum Database 4.3.x.x||PostGIS||2.0.3|
|PostGIS 1.0 for Greenplum Database||PostGIS||1.4.2|
|PL/Java 1.1 for Greenplum Database 4.3.x.x||PL/Java||Based on 1.4.0|
|Java JDK||1.6.0_26 Update 31|
|PL/R 1.0 for Greenplum Database 4.3.x.x||PL/R||18.104.22.168|
|PL/Perl 1.2 for Greenplum Database 4.3.x.x||PL/Perl||Based on PostgreSQL 9.1|
|Perl||5.12.4 on RHEL 6.x
5.5.8 on RHEL 5.x, SUSE 10
|PL/Perl 1.1 for Greenplum Database||PL/Perl||Based on PostgreSQL 9.1|
|Perl||5.12.4 on RHEL 5.x, SUSE 10|
|PL/Perl 1.0 for Greenplum Database||PL/Perl||Based on PostgreSQL 9.1|
|Perl||5.12.4 on RHEL 5.x, SUSE 10|
|Pgcrypto 1.1 for Greenplum Database 4.3.x.x||Pgcrypto||Based on PostgreSQL 8.3|
|MADlib 1.5 for Greenplum Database 4.3.x.x||MADlib||Based on MADlib version 1.8|
Greenplum Database 4.3 supports these minimum Greenplum Database extensions package versions.
|Greenplum Database Extension||Minimum Package Version|
Package File Naming Convention
For Greenplum Database 4.3, this is the package file naming format.
This example is the package name for a postGIS package.
pkgname-ver - The package name and optional version of the software that was used to create the package extension. If the package is based on open source software, the version has format ossvversion. The version is the version of the open source software that the package is based on. For the postGIS package, ossv2.0.3 specifies that the package is based on postGIS version 2.0.3.
pvpkg-version - The package version. The version of the Greenplum Database package. For the postGIS package, pv2.0 specifies that the Greenplum Database package version is 2.0.
gpdbrel-OS-version-arch - The compatible Greenplum Database release. For the postGIS package, gpdb4.3-rhel5-x86_64 specifies that package is compatible with Greenplum Database 4.3 on Red Hat Enterprise Linux version 5.x, x86 64-bit architecture.
Hadoop Distribution Compatibility
This table lists the Hadoop extensions compatibility matrix:
|Pivotal HD||Pivotal HD 1.01|
|Greenplum HD||Greenplum HD 1.1|
|Greenplum HD 1.2|
|CDH4.1 with MRv1|
|Greenplum MR||Greenplum MR 1.0|
|Greenplum MR 1.2|
Greenplum Database 4.3.1 Documentation
For the latest Greenplum Database documentation go to Pivotal Documentation. Greenplum documentation is provided in PDF format.
|Greenplum Database 4.3.1 Release Notes||A04|
|Greenplum Database 4.3 Installation Guide||A02|
|Greenplum Database 4.3 Administrator Guide 2||A01|
|Greenplum Database 4.3 Reference Guide||A02|
|Greenplum Database 4.3 Utility Guide||A02|
|Greenplum Database 4.3 Client Tools for UNIX||A02|
|Greenplum Database 4.3 Client Tools for Windows||A02|
|Greenplum Database 4.3 Connectivity Tools for UNIX||A02|
|Greenplum Database 4.3 Connectivity Tools for Windows||A02|
|Greenplum Database 4.3 Load Tools for UNIX||A02|
|Greenplum Database 4.3 Load Tools for Windows||A02|
|Greenplum Command Center 1.2.2 Administrator Guide||A01|