Expands an existing Greenplum Database across new hosts in the array.


gpexpand [{-f|--hosts-file} hosts_file]
        | {-i|--input} input_file [-B batch_size] [-V|--novacuum] 
        | {{-d | --duration} hh:mm:ss | {-e|--end} 'YYYY-MM-DD hh:mm:ss'} 
          [-n  parallel_processes]
        | {-r|--rollback}
        | {-c|--clean}
        [-D database_name] [-v|--verbose] [-s|--silent]
        [{-t|--tardir} directory ]
        [-S|--simple-progress ]

gpexpand -? | -h | --help 

gpexpand --version


  • You are logged in as the Greenplum Database superuser (gpadmin).
  • The new segment hosts have been installed and configured as per the existing segment hosts. This involves:
    • Configuring the hardware and OS
    • Installing the Greenplum software
    • Creating the gpadmin user account
    • Exchanging SSH keys.
  • Enough disk space on your segment hosts to temporarily hold a copy of your largest table.
  • When redistributing data, Greenplum Database must be running in production mode. Greenplum Database cannot be restricted mode or in master mode. The gpstart options -R or -m cannot be specified to start Greenplum Database.


The gpexpand utility performs system expansion in two phases: segment initialization and then table redistribution.

In the initialization phase, gpexpand runs with an input file that specifies data directories, dbid values, and other characteristics of the new segments. You can create the input file manually, or by following the prompts in an interactive interview.

If you choose to create the input file using the interactive interview, you can optionally specify a file containing a list of expansion hosts. If your platform or command shell limits the length of the list of hostnames that you can type when prompted in the interview, specifying the hosts with -f may be mandatory.

In addition to initializing the segments, the initialization phase performs these actions:

  • Creates an expansion schema to store the status of the expansion operation, including detailed status for tables.
  • Changes the distribution policy for all tables to DISTRIBUTED RANDOMLY. The original distribution policies are later restored in the redistribution phase.
To begin the redistribution phase, you must run gpexpand with either the -d (duration) or -e (end time) options. Until the specified end time or duration is reached, the utility will redistribute tables in the expansion schema. Each table is reorganized using ALTER TABLE commands to rebalance the tables across new segments, and to set tables to their original distribution policy. If gpexpand completes the reorganization of all tables before the specified duration, it displays a success message and ends.
Note: Data redistribution should be performed during low-use hours. Redistribution can divided into batches over an extended period.


-a | --analyze
Run ANALYZE to update the table statistics after expansion. The default is to not run ANALYZE.
-B batch_size
Batch size of remote commands to send to a given host before making a one-second pause. Default is 16. Valid values are 1-128.
The gpexpand utility issues a number of setup commands that may exceed the host's maximum threshold for authenticated connections as defined by MaxStartups in the SSH daemon configuration. The one-second pause allows authentications to be completed before gpexpand issues any more commands.
The default value does not normally need to be changed. However, it may be necessary to reduce the maximum number of commands if gpexpand fails with connection errors such as 'ssh_exchange_identification: Connection closed by remote host.'
-c | --clean
Remove the expansion schema.
-d | --duration hh:mm:ss
Duration of the expansion session from beginning to end.
-D database_name
Specifies the database in which to create the expansion schema and tables. If this option is not given, the setting for the environment variable PGDATABASE is used. The database templates template1 and template0 cannot be used.
-e | --end 'YYYY-MM-DD hh:mm:ss'
Ending date and time for the expansion session.
-f | --hosts-file filename
Specifies the name of a file that contains a list of new hosts for system expansion. Each line of the file must contain a single host name.
This file can contain hostnames with or without network interfaces specified. The gpexpand utility handles either case, adding interface numbers to end of the hostname if the original nodes are configured with multiple network interfaces.
Note: The Greenplum Database segment host naming convention is sdwN where sdw is a prefix and N is an integer. For example, on a Greenplum Database DCA system, segment host names would be sdw1, sdw2 and so on. For hosts with multiple interfaces, the convention is to append a dash (-) and number to the host name. For example, sdw1-1 and sdw1-2 are the two interface names for host sdw1.
-i | --input input_file
Specifies the name of the expansion configuration file, which contains one line for each segment to be added in the format of:
If your system has filespaces, gpexpand will expect a filespace configuration file (input_file_name.fs) to exist in the same directory as your expansion configuration file. The filespace configuration file is in the format of:
filespaceOrder=filespace1_name:filespace2_name: ...
dbid:/path/for/filespace1:/path/for/filespace2: ...
dbid:/path/for/filespace1:/path/for/filespace2: ...
-n parallel_processes
The number of tables to redistribute simultaneously. Valid values are 1 - 96.
Each table redistribution process requires two database connections: one to alter the table, and another to update the table's status in the expansion schema. Before increasing -n, check the current value of the server configuration parameter max_connections and make sure the maximum connection limit is not exceeded.
-r | --rollback
Roll back a failed expansion setup operation. If the rollback command fails, attempt again using the -D option to specify the database that contains the expansion schema for the operation that you want to roll back.
-s | --silent
Runs in silent mode. Does not prompt for confirmation to proceed on warnings.
-S | --simple-progress
If specified, the gpexpand utility records only the minimum progress information in the Greenplum Database table gpexpand.expansion_progress. The utility does not record the relation size information and status information in the table gpexpand.status_detail.
Specifying this option can improve performance by reducing the amount of progress information written to the gpexpand tables.
[-t | --tardir] directory
The fully qualified path to a directory on segment hosts were the gpexpand utility copies a temporary tar file. The file contains Greenplum Database files that are used to create segment instances. The default directory is the user home directory.
-v | --verbose
Verbose debugging output. With this option, the utility will output all DDL and DML used to expand the database.
Display the utility's version number and exit.
-V | --novacuum
Do not vacuum catalog tables before creating schema copy.
-? | -h | --help
Displays the online help.


Run gpexpand with an input file to initialize new segments and create the expansion schema in the default database:

$ gpexpand -i input_file

Run gpexpand for sixty hours maximum duration to redistribute tables to new segments:

$ gpexpand -d 60:00:00

See Also